Rockwell Automation DeviceLogix System User Manual - Manual (Page 134)

134 Publication RA-UM003B-EN-P - February 2010
Chapter 6 Navigate the New Ladder Editor Interface
Misc. Element Toolbar
For detailed descriptions of instruction behaviors, refer to Chapter 2,
Navigate the Function Block Editor Interface.
Online Toolbar
Use the Online toolbar to perform functions when you are working
on line in the new Ladder Editor.
Square Root Element
Negative Element
Absolute Element
Function Description
Set Dominant Latch Element
Reset Dominant Latch Element
Reset Latch Element
Function Description
Upload the logic configuration from the device to the new Ladder
Editor configuration tool.
Download the logic configuration from the new Ladder Editor to
the device. The configuration must pass the logic verification
process for the download to be successful.
Run the DeviceLogix logic configuration that you have
downloaded to the device.
Stop the DeviceLogix logic configuration running in the device.
Compare the logic in the device with that in the new Ladder
Editor configuration tool.
TIP
Some host software programs control the upload and download
communications, so these functions are not available to you in
the new Ladder Editor.
Function Description