Rockwell Automation DeviceLogix System User Manual - Manual (Page 62)

62 Publication RA-UM003B-EN-P - February 2010
Chapter 2 Navigate the Function Block Editor Interface
Edit Menu
The Edit menu lets you modify elements in the schematic. .
Edit Menu
Function Description
Undo Cancels the last action.
Redo Performs again the previously cancelled action.
Cut
1 Removes the selected function block element.
Copy
1 Duplicates the selected content to save it in the clipboard.
Paste
1 Places the content in the clipboard into the Function Block
Editor at the position that your cursor is resting.
Delete Permanently removes the selected content from the
schematic.
Add Element Adds the element at the cursor position. The List of
Elements dialog box opens for you to select an element
type.
Select All Highlights all the elements in the Function Block Editor (to
copy or cut).
Properties Opens the Configuration Properties dialog box to modify
properties, such as Author, Revision, and Description.
Recovery Mode Opens the Recovery Mode dialog box to determine if logic is
automatically enabled following a module replacement.
When you use an Allen-Bradley master, choose the recovery
mode option to determine how the I/O device recovers from
an automatic download by a master device.
When an I/O device fails and a new device is added to
replace it, a master device on the network can automatically
download the stored configuration and logic to the device.
This feature is known as Auto Device Replace (ADR). The
recovery mode determines whether or not to enable the
local logic when a download of this type occurs. The
recovery mode is disabled by default. ADR in the scanner is
also disabled by default.
1
You can cut/copy/paste across multiple instances of the Function Block Editor when the source
version and the target version of the Function Block Editor are the same and the target device
supports the element that is being copied.