Rockwell Automation DeviceLogix System User Manual - Manual (Page 72)

72 Publication RA-UM003B-EN-P - February 2010
Chapter 3 Bind Function Blocks with I/O
Function Block Properties and Parameters
To open a function block’s property page, double-click the function
block on the schematic page.
General tab
The following is an example General tab:
On this tab, the following fields are available:
Field Description
Function Block Type Displays the current function block type (read only).
Input Number Displays the number of available inputs with this function block
(Boolean function blocks are configurable; other function blocks
are read only).
Function Data Type Allows you to selct the function data type. Select between DINT
and REAL. For some function blocks, this field is read-only.
Execution Sequence
Number Displays the execution sequence number for this block (once the
project has been verified).
Function Block
Comment Allows you to include a comment with this function block (up to
100 characters).