Rockwell Automation DeviceLogix System User Manual - Manual (Page 153)

Publication RA-UM003B-EN-P - February 2010 153
Create Logic in the New Ladder Editor Chapter 7
Add Macro Instruction to Ladder Logic
Add the Macro instruction into your ladder logic configuration just as
you would add a standard instruction.
• Choose Edit > Add Ladder Element, select the Macro
instruction element in the Add Ladder Element dialog box, and
click OK.
• Click the instruction icon in the Macro tab of the Instruction
toolbar.
• Drag the instruction from the Macro tab of the Instruction
toolbar and drop it into the ladder logic.
Only valid Macro definitions will appear in the Instruction toolbar and
in the Add Ladder Element dialog box.