Rockwell Automation DeviceLogix System User Manual - Manual (Page 147)

Publication RA-UM003B-EN-P - February 2010 147
Create Logic in the New Ladder Editor Chapter 7
Work with the Macro Instruction
You can access, edit, and manage Macro instructions through new
Tools menu options:
• Create Macro Block
• Macro Block Manager
• Open Macro Block Definition
• Delete Macro Block
• Open Macro Block Logic
Using a Macro instruction encompasses these general steps, each of
which is described in following sections.
1. Create the Macro definition
2. Define the external I/O binding
3. Add parameters
4. Set security (optional)
5. Apply the Macro definition
6. Add the Macro instruction to ladder logic
7. Manage the Macro