Rockwell Automation DeviceLogix System User Manual - Manual (Page 195)

Publication RA-UM003B-EN-P - February 2010 195
RSNetWorx for DeviceNet Software and the DeviceLogix Editors Appendix B
Access I/O Data Information
The I/O Data window provides information about default I/O
characteristics for the device. The amount of data that the device
reports is described here. Note however that the help only covers the
data returned by the EDS file default settings. This window does not
report data enabled by the DeviceLogix-specific settings.
To access the I/O Data window, click on the I/O Data tab in the
device properties dialog box.
IMPORTANT
Legacy DeviceLogix-enabled devices use a different style of the
I/O Data (called I/O Defaults) property page than the Current
DeviceLogix-enabled devices. Although the property pages may
look different, they contain the same corresponding functions
and options. The graphics and discussion in this section will
only show the current I/O Data property page.