Rockwell Automation DeviceLogix System User Manual - Manual (Page 177)

Publication RA-UM003B-EN-P - February 2010 177
Appendix
B
RSNetWorx for DeviceNet Software and the
DeviceLogix Editors
What This Appendix
Contains In this appendix you will access the RSNetWorx for DeviceNet
software device properties dialog box to set up general properties,
determine parameters and launch the DeviceLogix Editor tools.
Access Device Properties Access device properties and DeviceLogix features from the device
properties dialog box in RSNetWorx for DeviceNet software. The
device properties dialog box is the same for both DeviceLogix devices
and non-DeviceLogix devices, except when you are working with a
DeviceLogix-enabled device, you see an additional tab called
DeviceLogix in the properties dialog box.
To access the device properties dialog box:
• Double-click the DeviceLogix-enabled device you added on the
RSNetWorx for DeviceNet software graph (right pane).
The following sections describe the tasks you perform in the device
properties dialog box that affect DeviceLogix features. For a complete
discussion of the general features of the RSNetWorx for DeviceNet
software device properties dialog box, see the RSNetWorx for
DeviceNet software documentation.
Topic Page
Access Device Properties 177
Check General Information 178
Enter Device Parameters 180
Understand Parameters 184
Determine Parameters 188
Access I/O Data Information 195
Access EDS Information 196
Launch the DeviceLogix Editor 198