Rockwell Automation DeviceLogix System User Manual - Manual (Page 139)

Publication RA-UM003B-EN-P - February 2010 139
Navigate the New Ladder Editor Interface Chapter 6
When an I/O device fails and a new device is added to replace it, a
master device on the network can automatically download the stored
configuration and logic to the device. This feature is known as Auto
Device Replace (ADR). The recovery mode determines whether or not
to enable the local logic when a download of this type occurs. The
recovery mode is disabled by default. ADR in the scanner is also
disabled by default.
Logic Enable Selection Mode
If the host software supports the Logic Enable Selection Mode, choose
Edit > Logic Enable Selection Mode. In the Logic Enable Selection
dialog box, indicate your preference for enabling logic in the device.
If you want the logic execution to be determined by the logic
enable/disable button, select the appropriate radio button and either:
• select Disabe to add a stop logic service, or
• select Enable to add a run logic service.
If you want the logic execution to be determined by the connection
status, select the appropriate radio button. You will not be permitted
to run or stop the logic in the new Ladder Editor; you will be able to
monitor the status of the logic in the device.
View Menu
The View menu lets you modify your view of the new Ladder Editor.
Function Description
Standard Bar Toggles between displaying and not displaying this toolbar.
Online Bar Toggles between displaying and not displaying this toolbar.
Instruction Bar Toggles between displaying and not displaying this toolbar.