Rockwell Automation DeviceLogix System User Manual - Manual (Page 63)

Publication RA-UM003B-EN-P - February 2010 63
Navigate the Function Block Editor Interface Chapter 2
View Menu
The View menu lets you modify your view of the schematic in the
Function Block Editor.
View Menu
Function Description
Toolbars Opens the Toolbars dialog box to determine which toolbars
display in the DeviceLogix Function Block Editor software.
Status Bar Toggles between displaying and not displaying the status
bar at the bottom of the Function Block Editor.
Message Log Window Toggles between displaying and not displaying the
Message Log window at the bottom of the Function Block
Editor.
Zoom In Increases (make larger) the view of the configuration. You
lose view of part of the schematic of the Function Block
Editor when you use this function.
Zoom Out Decreases (make smaller) the view of the configuration. You
see more of the schematic of the Function Block Editor
when you use this function.
Fit to Page Displays the entire logic diagram schematic within the
application window. This causes the logic elements to
appear very small, but displays the entire schematic.
Zoom to 100% Causes the configuration pane to mirror what is seen on the
printed version when the configuration pane is printed.