Rockwell Automation DeviceLogix System User Manual - Manual (Page 58)

58 Publication RA-UM003B-EN-P - February 2010
Chapter 2 Navigate the Function Block Editor Interface
Macro Block Category Toolbar
Beginning with DeviceLogix firmware revision 4, certain devices
support Macro function block instructions. Once you define a Macro
instruction, a new tabbed instruction toolbar appears. For more
information on Macro function block instructions, refer to Chapter 3,
Bind Function Blocks with I/O.
Online Toolbar
Use the Online toolbar to perform functions when you are working
on line in the Function Block Editor.
Online Toolbar
Function Description
Upload the logic configuration from the device to the
Function Block Editor configuration tool.
Download the logic configuration from the Function Block
Editor to the device. The configuration must pass the logic
verification process for the download to be successful.
Run the DeviceLogix logic configuration that you have
downloaded to the device.
Stop the DeviceLogix logic configuration running in the
device.
Compare the logic in the device with that in the Function
Block Editor configuration tool.