Rockwell Automation WebPak 3000 User Guide - Manual (Page 70)

A-2 WebPak 3000 OIM User Guide
FEEDBACK SELECT (P.200)
ANLG TACH VOLTS /1000 (P.203)
ENCODER PPR (P.207)
ACCELERATION TIME (P.001)
DECELERATION TIME (P.002)
MINIMUM SPEED (P.003)
MAXIMUM SPEED (P.004)
JOG ACCEL / DECEL TIME (P.013)
JOG SPEED (P.012)
POSITIVE CURRENT LIM (P.005)
NEGATIVE CURRENT LIM (P.006)
IR COMPENSATION (P.206)
MOTOR HOT FLD AMPS (P.510)
J 11 ANLG TACH VLT SCL (P.792)
J 14 ANLG TACH VLT RNG (P.793)
J 18 ARM I FB RESISTOR (P.395)
Self Tune
Drive Reference
Drive Reference Test Points
LINE SPEED (P.188)
DIAMETER / TAPER IN (P.192)
ANALOG TRIM REF (P.195)
SPEED RAMP INPUT TP (P.198)
DRAW PERCENTAGE OUT (P.196)
TRIM OUTPUT (P.197)
SPEED RAMP OUTPUT (P.199)
SPD SOURCE SELECT OUT (P.193)
JOG RAMP OUTPUT (P.294)