Rockwell Automation GV3000/SE AC Bookshelf Drive Hardware Ref, Installation, and Troubleshooting - Manual (Page 58)

7-8 GV3000/SE AC Bookshelf Drive Hardware Reference, Version 6.06
Table 7.6 - Wiring Signal and Control I/O to the Regulator Board Terminal Strip (Continued)
Terminal
Number Description Parameters/Wiring Connections
Wiring Analog Speed Reference Inputs
12
13
14
15
Isolated Reference
Voltage (+10 VDC)
Analog Speed/Torque
Reference Input Voltage
(+/- 10 VDC)
Analog Speed/Torque
Reference Input Current
(0-20 mA)
Isolated Speed/Torque
Reference Common
(Voltage/Current)
Related parameters:
• P.000: Control Source
• P.009: Terminal Strip Analog Input Offset
• P.010: Terminal Strip Analog Input Gain
• P.011: Terminal Strip Analog Input Configure
Refer to the GV3000/SE Bookshelf Drive Software Start-Up
and Reference manual for additional parameter information.
Jumper J4 must also be set. See figure 2.7.
Refer to Appendix G of the GV3000/SE Bookshelf Drive
Software Start-Up and Reference manual for more
information about the analog input.