Rockwell Automation GV3000/SE AC Bookshelf Drive Hardware Ref, Installation, and Troubleshooting User Manual
Page 76
Advertising
![background image](/manuals/581471/76/background.png)
10-6
GV3000/SE AC Bookshelf Drive Hardware Reference, Version 6.06
IGBT
No.
Meter
Connection
(+) (-)
Component is OK if
resistance (R) is:
Component is defective if:
V6
47*
W(T3)
0.3 < R < 8K ohm
Continuity (short circuit) or
open when the meter is
connected with reversed
polarity
V5
47*
V(T2)
V4
47*
U(T1)
V3
W(T3)
45*
V2
V(T2)
45*
V1
U(T1)
45*
*If the optional terminals 45 and 47 are not fitted (e.g., on drives with built-in chopper option), remove
cover and connect the meter to the measuring points according to the procedure in section 10.3.
Advertising