Rockwell Automation 1756-Enxxx_Ewxxx EtherNet/IP Modules Installation Instructions User Manual

Page 5

Advertising
background image

Rockwell Automation Publication ENET-IN002F-EN-P - January 2014

5

Table of Contents

Preface

Studio 5000 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 1

Install a 1756 EtherNet/IP
Communication Module

Installation Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Determine Module Slot Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Set the Network IP Address on a Module . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Set the Network IP Address with the Rotary Switches . . . . . . . . . . . 17
Set the Network IP Address with the BOOTP/DHCP Server. . . . 18
Set the Network IP Address with RSLinx Software or the
Studio 5000 Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Reset the Module IP Address to a Factory Default Value . . . . . . . . . 25

Install the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Wire the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Use the following information to wire the module. . . . . . . . . . . . . . . 26
Connect the Module to an EtherNet/IP Network via an
RJ45 Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connect the Module to an EtherNet/IP Network via a
Fiber Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Download the Add-on Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connect to the Module via the USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Download the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Digitally Signed Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Apply Chassis Power and Check Status Indicators . . . . . . . . . . . . . . . . . . 32
Install or Remove the Module Under Power. . . . . . . . . . . . . . . . . . . . . . . . 33

Chapter 2

Install a 1768 EtherNet/IP
Communication Module

Installation Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Set the Network IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Set the Network IP Address with a BOOTP/DHCP Server. . . . . . 40
Set the Network IP Address with RSLinx Software or the
Studio 5000 Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Reset the Module IP Address to a Factory Default Value . . . . . . . . . 46

Install the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Mount the Module with Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Mount on a DIN Rail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Wire the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Connect the Module to an EtherNet/IP Network via an
RJ45 Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Download the Add-on Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Download the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Apply Chassis Power and Check Status Indicators . . . . . . . . . . . . . . . . . . 51
Remove the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Advertising