Rockwell Automation 1756-Enxxx_Ewxxx EtherNet/IP Modules Installation Instructions - Manual (Page 74)

74 Rockwell Automation Publication ENET-IN002F-EN-P - January 2014
Chapter 3 Install a 1769 EtherNet/IP Adapter
Download the Add-on Profile If a module has a later firmware revision for the communication module than
recognized in the most current version of the Logix Designer application, you
need to download the Add-on Profile (AOP) for the communication module so
it can be recognized in the Controller Organizer.
Complete these steps to download and install an AOP.
1. Go to the Rockwell Automation Web site at
http://www.rockwellautomation.com/ .
2. From the Support tab, choose Product Compatibility & Download
Center.
3. On the Get Downloads tab, click Find Product Downloads.
4. Enter the catalog number and click Go.
5. Select the module from the list then click the Find Downloads button at
the bottom of the Selections tab.
6. Click the download graphic .
The Available Downloads window opens.
7. From the bulleted list, choose the firmware name.
The End User License Agreement opens.
8. Review the agreement and click I Agree.
The Rockwell Automation Download Manager opens and the download
begins. The location of the downloaded file is shown under the progress
bar.