Rockwell Automation 1756-Enxxx_Ewxxx EtherNet/IP Modules Installation Instructions - Manual (Page 9)

Rockwell Automation Publication ENET-IN002F-EN-P - January 2014 9
Preface
This manual describes how to install and start up EtherNet/IP module systems
with Logix5000

controllers.
Use this manual if you program applications that use an EtherNet/IP network
with one of these Logix5000 controllers:
• CompactLogix

• ControlLogix

You should also understand the following:
• Networking concepts
• How to the use Studio 5000

environment
• How to use RSLinx

Classic programming software
Studio 5000 Environment The Studio 5000 Engineering and Design Environment combines engineering
and design elements into a common environment. The first element in the Studio
5000 environment is the Logix Designer application. The Logix Designer
application is the rebranding of RSLogix

5000 software and continues to be the
product to program Logix5000 controllers for discrete, process, batch, motion,
safety, and drive-based solutions.
The Studio 5000 environment is the foundation for the future of Rockwell
Automation
 
engineering design tools and capabilities. This environment is the
one place for design engineers to develop all of the elements of their control
system.