Rockwell Automation Logix5000 Control Systems: Connect Kinetix 5500 Drives on EtherNet/IP Network Quick Start - Manual (Page 28)

28 Rockwell Automation Publication IASIMP-QS035A-EN-P - December 2012
Chapter 1 Prepare the Kinetix 5500 Drive Hardware
Connect the Kinetix 5500 Drive to the EtherNet/IP Network
Ethernet connections are made at the PORT 1 and PORT 2 connectors. The Kinetix 5500 drives include two
RJ45 connectors to support linear and ring topologies when multiple standalone drives are present.
PORT 1 and PORT 2
Ethernet Connectors
1585J-M8CBJM-OM3
0.3 m (1.0 ft) Ethernet cable
for drive-to-drive connections.
Kinetix 5500 Servo Drive
(single, standalone)
Kinetix 5500 Servo Drives
(multiple, standalone)