Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 - Manual (Page 12)

1 • I NTRODUCTION
6
•
•
•
• •
Hardware requirements:
 PC with 2 GHz or higher dual core processor recommended
 2 GB of RAM (or more, depending on application requirements)
 3 GB of free hard disk space (or more, depending on application requirements)
 Graphics adapter capable of a minimum resolution of 1024 x 768 pixels
 Keyboard and pointing device (mouse)
 Network adapter card
Software requirements:
 One of the following Windows operating systems:
 Windows 7 Professional 32-bit or 64-bit
 Windows Server 2008 Standard 32-bit or 64-bit
 Windows Server 2008 R2 64-bit
 Windows Vista 32-bit (with Service Pack 1 or later)
 Windows XP Professional 32-bit (with Service Pack 2 or later)
 Windows Server 2003 32-bit (with Service Pack 2 or later)
 Microsoft Internet Explorer Web browser, version 6.0 or higher (version 7.0
recommended for Windows Vista operating systems)
 FactoryTalk Services Platform 2.10.00 or later
 RSLinx Classic Lite version 2.53 or later
 (optional) RSLogix 5 version 7.30 or later, RSLogix 500 version 8.10 or later,
RSLogix 5000 version 12 or later, Studio 5000™ Logix Designer application version
21 or later, or any other version released as part of CPR 9 or later
To take advantage of auditing, the FactoryTalk AssetCentre client should be installed
on each computer running your RSLogix family software.
To edit the file and data settings for a compare operation for PLC-5, SLC 500, or
MicroLogix processors, you must have RSLogix 5 or RSLogix 500 software installed
on the client computer.
FTAC-IN005A-EN-E.book Page 6 Monday, March 4, 2013 4:03 PM