Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 - Manual (Page 14)

1 • I NTRODUCTION
8
•
•
•
• •
Software requirements:
 One of the following Windows operating systems:
 Windows 7 Professional 32-bit or 64-bit
 Windows Server 2008 Standard 32-bit or 64-bit
 Windows Server 2008 R2 64-bit
 Windows Vista Business 32-bit (with Service Pack 1 or later)
 Windows XP Professional 32-bit (with Service Pack 2 or later)
 Windows Server 2003 32-bit (with Service Pack 2 or later)
 Microsoft Internet Explorer Web browser, version 6.0 or higher (version 7.0
recommended for Windows Vista operating systems)
 FactoryTalk Services Platform 2.10.00 or later
 RSLinx Classic Lite version 2.53 or later
 RSLinx Enterprise version 5.00 or later
 RSLogix 5000 Compare utility version 3.20 or later
 RSLogix 5 version 7.30 or later, RSLogix 500 version 8.10 or later, RSLogix 5000
version 12 or later, Logix Designer version 21 or later, or any other version released as
part of CPR 9 or later
For Disaster Recovery functions, the appropriate programming software for your
devices MUST be installed on the agent computer.
 FactoryTalk View ME Transfer Utility 5.00 or later if your system includes PanelView
Plus operator interfaces
 DriveExecutive™ Lite version 5.01 or later if your system includes Rockwell
Automation drives
For this device… Install...
PLC-5 RSLogix 5
SLC 500, MicroLogix RSLogix 500
ControlLogix RSLogix 5000 or Logix Designer
PanelView Plus View ME Transfer Utility and RSLinx Enterprise
Rockwell Automation drives DriveExecutive Lite
FTAC-IN005A-EN-E.book Page 8 Monday, March 4, 2013 4:03 PM