Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 - Manual (Page 35)

3 • I NSTALLING THE F ACTORY T ALK A SSET C ENTRE SERVER
29
•
•
•
• •
For more detailed information about activation for FactoryTalk AssetCentre, see the
online help. For more information about FactoryTalk Activation, see the “Activate
Rockwell Software Products” insert that came with your FactoryTalk AssetCentre
software or the online help for the FactoryTalk Activation Manager.
Installing RSLinx Enterprise
See “Installing the FactoryTalk AssetCentre server software” on page 23 for the steps to get to
this part of the installation.
After FactoryTalk Activation installation is complete, the RSLinx Enterprise installation
program starts automatically.
1. Follow the on-screen instructions.
2. In the Setup Type page of the installation wizard, select Standard Feature Set
Installation and then click Next.
3. Follow the on-screen instructions to complete the installation.
4. On the InstallShield Wizard Completed window, click Finish.
Patch FactoryTalk Services Platform
See “Installing the FactoryTalk AssetCentre server software” on page 23 for the steps to get to
this part of the installation.
If you have FactoryTalk Services Platform and you have already checked for and installed
FactoryTalk Services Platform patches (see “Before you begin, check and install
FactoryTalk Services Platform and FactoryTalk View patches” on page 14), click Finish
and continue the installation of the other components.
If you have FactoryTalk Services Platform and you have NOT already installed patches,
follow the instructions on the FactoryTalk Services Platform Patch Installation window.
1. A command prompt window opens while each patch is being installed. When
processing in the command prompt completes, ignore the message to reboot your
computer and close the command prompt window.
2. Install the next patch, closing the command prompt window when that patch is
finished.
3. When the last patch has been installed, close the last command prompt and click
Finish on the FactoryTalk Services Platform Patch Installation window. A message
informs you that the system will restart. Click OK.
You need an Internet connection to install activation. If you do not have an internet connection,
see the “Activate Rockwell Software Products” insert that came with your FactoryTalk
AssetCentre software.
FTAC-IN005A-EN-E.book Page 29 Monday, March 4, 2013 4:03 PM