Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 - Manual (Page 49)

4 • I NSTALLING F ACTORY T ALK A SSET C ENTRE CLIENTS
43
•
•
•
• •
2. When you are asked whether you want to install the FactoryTalk Administration
Console, be sure the check box is selected (you will need the console to help you
configure the FactoryTalk Directory). Continue to follow the on-screen instructions.
3. Click Finish on the InstallShield Wizard for the FactoryTalk Services Platform. If you
are prompted to restart your computer for configuration changes made to FactoryTalk
Services Platform to take effect, click No to restart later. Follow the on-screen
instructions to continue the installation.
If you have RSLinx Classic version 2.53 or later installed on your computer, the installation
program skips to step 11.
4. Click Required Steps on the RSLinx Classic Welcome Page.
5. Click Install RSLinx Classic on the Welcome to RSLinx Classic window. Click Run
on the Open File - Security Warning window.
RSLinx Classic allows you to connect to Rockwell Automation control hardware.
RSLinx Classic is required even if you have RSLinx Enterprise. If RSLinx Classic is
not installed on the client computer, the installation program for the FactoryTalk
AssetCentre client will install RSLinx Classic Lite. RSLinx Classic Lite does not
support connections through OPC. For more information about RSLinx Classic, see
the RSLinx Classic documentation.
6. Follow the on-screen instructions. In the Customer Information page of the
installation wizard, enter your user name, organization name, and any ten digit
number. Then click Next.
7. In the Standard Setup page, select the components of the software you want to install
and to change the folder where the software is installed. We advise that you install all
of the components. Change the settings on this page as desired, and then click Next.
8. Continue following the on-screen instructions to complete the installation.
9. On the InstallShield Wizard Completed window, click Finish.
10. Click Exit on the RSLinx Classic installation menu.
If you receive an error message indicating that an attempt to configure the Windows Firewall
Configuration Utility failed, click OK and continue. The Windows Firewall will be configured
later.
If you receive a warning indicating that the software you are installing has not passed
Windows Logo testing to verify its compatibility with the Windows version, click Continue
Anyway.
FTAC-IN005A-EN-E.book Page 43 Monday, March 4, 2013 4:03 PM