Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 - Manual (Page 52)

4 • I NSTALLING F ACTORY T ALK A SSET C ENTRE CLIENTS
46
•
•
•
• •
A FTER RESTARTING
The installation software will initiate several component installations again in sequence
beginning with the FactoryTalk Services Platform. You can cancel the installation for all
components that you have already installed. The list below provides a step-by-step
sequence to cancel all installs that have been completed to this point. What you see may
vary depending on your particular system.
1. Click Start on the Install FactoryTalk AssetCentre Client window.
2. Click Finish on the FactoryTalk Services Platform Patch Installation window.
3. Depending on your FactoryTalk Directory setting, you may see the stop sign window
again about how to set the FactoryTalk Directory. See step 20 on page 45 to make the
appropriate choice.
4. Click Continue on the Check FactoryTalk Services Platform Configuration window.
FactoryTalk AssetCentre client software installer
See “Installing the FactoryTalk AssetCentre client software” on page 39 for the steps to get to this
part of the installation.
After the setup program checks your FactoryTalk Services Platform installation, it starts
the installation for the FactoryTalk AssetCentre client software.
1. Follow the on-screen instructions to install the FactoryTalk AssetCentre client until
you get to the Custom Setup page of the installation wizard.
2. The Custome Setup page asks which features of FactoryTalk AssetCentre client you
want to install. If you have Siemens S5 or S7 processors, you may also need to install
the 3rd party editor integration features.
To intall the 3rd party editor integration features, click the icon for the feature you
want to install and then click This feature will be installed on local hard drive. The
other icons should have a red X indicating that they will not be installed.
Currently, FactoryTalk AssetCentre supports the integration of the following editors:
 Step 7 Version 5.4
 Step 5 Version 7.x
 S5 for Windows
 ACCON-PG
FTAC-IN005A-EN-E.book Page 46 Monday, March 4, 2013 4:03 PM