Metrohm 763 PVC Thermomat Manual - Manual (Page 109)

4 Operation
763 PVC Thermomat
102
4.7.5 Recalculation
Recalculation window
763 PVC THERMOMAT RESULTS / Determination / Recalculation
The Recalculation window opens in which the results of the determina-
tions marked in the determination overview can be recalculated; it
contains the following three tabs:
Method Recalculation of the induction and stabil-
ity times.
Formulas Recalculation of formula 1...3.
Standards Recalculation of standard time.
Method
Method tab of the Recalculation window for the recalculation of induction
and stability times.
Recalculate induction time
Switches recalculation of the
induction time
on/off. If recalculation is switched off the origi-
nal result is retained.
Calculation active If this option is switched on then the parame-
ters for the calculation of the induction time can
be newly entered.
If this option is switched off then no result will
be produced (the original result is deleted).
Evaluation delay Delay time until start of the curve evaluation.
Evaluation suppression start
Time from start of determination until start of
evaluation suppression.
Evaluation suppression end
Time from start of determination until end of
evaluation suppression.