Metrohm 763 PVC Thermomat Manual User Manual
Page 118
4.7 Results
763 PVC Thermomat
111
Definition for multiple printing
with offset
If this option is switched on then in a printout of
multiple graphs the curves will be shown offset
from each other. In this case the difference of
the whole axis is shown in
µ
S/cm instead of the
normal conductivity axis marking.
Company settings
Tab of the
Program settings
window with settings for the output of the
company logo and company header in the report header.
<Company logo...>
The
Find company logo
window appears in which
the required graphics file (
*.wmf
or
*.bmp
) with
the company logo can be selected. After click-
ing on
<Open>
the logo is shown in the adjacent
window.
<Remove logo>
The included company logo is removed.
Logo on the...
left side
The company logo is printed out at the left-
hand margin of the header.
right side
The company logo is printed out at the right-
hand margin of the header.
Company text
The text entered here will be printed out at the
opposite side of the header to the company
logo.