Metrohm 763 PVC Thermomat Manual - Manual (Page 52)

4.3 Program information
763 PVC Thermomat
45
4.3.2 Status overview
763 PVC THERMOMAT CONTROL / View / Status overview
The
STATUS - 763 PVC THERMOMAT CONTROL
window opens and dis-
plays an overview of all available channels of the instruments con-
nected to the PC.
This window contains the following columns:
Unit Instrument number (1...4).
Block Instrument block (A, B).
Channel
Channel (1...4).
Method Method name.
Sample ID1 Sample identifier 1.
Status Status of channel:
ready No active measurement. The channel is ready
for the start of a determination.
running Running measurement.
finished Determination finished. The channel is ready for
the start of a new determination.
error Communication error between instrument and
PC.
Stab. time Determined stability time.
Induc. time Determined induction time.
Set temp. Set temperature defined in method.
Current temp. Actual block temperature.
The width of the columns in the STATUS - 763 PVC THERMOMAT CONTROL
window can be altered by pulling the right-hand field margin of the col-
umn title with the mouse. These settings together with the window size
and window position can be permanently stored with
763 PVC THERMO-
MAT CONTROL / Options / Save settings now .