Metrohm 763 PVC Thermomat Manual - Manual (Page 132)

4.8 GLP
763 PVC Thermomat
125
Temperature Conductivity
18 °C 127 µ S/cm
19 °C 130 µ S/cm
20 °C 133 µ S/cm
21 °C 136 µ S/cm
22 °C 138 µ S/cm
23 °C 141 µ S/cm
24 °C 144 µ S/cm
25 °C 147 µ S/cm
• Click on <Next> in the GLP test window. The conductivity of
each channel is measured in sequence.
4 Confirm/cancel test results
• When the last measurement has been completed the TEST
RESULTS (set values and measured values) for the measured
channels will be shown.
Test passed: The variation of the measured
conductivity is within the preset tolerance.
Test failed: The variation of the measured
conductivity is larger than the preset tolerance.
• Check the results and click on <Finish> to save the GLP test
results or on <Cancel> to abort the GLP test without saving the
results.