Metrohm 763 PVC Thermomat Manual - Manual (Page 68)

4.5 Methods
763 PVC Thermomat
61
Formulas
Tab Formulas of the Method parameters window with parameters for en-
tering equations for further calculations with the induction and stability
times.
Formula 1 for induction time
If this option is switched on then the automati-
cally determined Induction time will be calcu-
lated from the values entered in the equation by
the operator and then stored as the Formula 1
result under the name entered in the first field.
Formula 2 for stability time
If this option is switched on then the automati-
cally determined Stability time will be calculated
from the values entered in the equation by the
operator and then stored as the Formula 2 result
under the name entered in the first field.
Formula 3 for stability time
If this option is switched on then the automati-
cally determined Stability time will be calculated
from the values entered in the equation by the
operator and then stored as the
Formula 3
result
under the name entered in the first field.