2 results – Metrohm 763 PVC Thermomat Manual User Manual

Page 31

Advertising

3 Operating tutorial

763 PVC Thermomat

3.2

Results

The demo database

Demo.mrd

is used as an example for the display

and further processing of the results of recorded determinations.

Please note that the steps and parameter settings described apply

only to this database. If you use a different database, the procedures

described in the tutorial must be modified appropriately.

3.2.1

Determination overview

The determination overview displays an overview table with selected

data fields of all the determinations contained in the opened database.

1 Open database "demo.mrd"

⇒

Click on

File / Results

in the control window in order to

open the

763 PVC THERMOMAT RESULTS

window. This loads

the

Repos.mrd

database and opens the determination over-

view as standard.

⇒

Click on

File / Open database

in the results window. Select the

demo.mrd

database in the

Open database

window and click on

<Open>

. A sub-window opens in the results window which

shows the data from 5 determinations in an overview table.

2 Format determination overview

⇒

Select fields: Click on

Format / Select fields

in the

results window. In the

Display fields

window move the fields

until the fields required for the determination overview are

visible in the

Display

field and then click on

<OK>

⇒

Adjust field width: Mark the column in the determination

overview whose width is to be altered. Click on

Format / Adjust

width

in the results window. Enter the column width in the

Col-

umn width

window or click on

<Best fit>

in order to automati-

cally adapt the column width to the longest field contents.

Alternatively the column width can also be set directly by us-

ing the mouse. This is done by moving the cursor between

two columns in the title line of the table until it appears as .

The column can now be pulled to the required width with the

left-hand mouse key pressed down. A double-click on the

Advertising