Metrohm 763 PVC Thermomat Manual - Manual (Page 41)

4 Operation
763 PVC Thermomat
34
Tools Cell constants, GLP test, timer, gas flow control, start all
channels, determination of Delta T, temperature recording,
service diagnosis.
Options General settings, instrument configuration, user permis-
sions.
Help Program-specific on-line help.
Icons
The following icons are displayed in the control window:
Create new method (see section 4.5.1).
Open existing method (see section 4.5.1).
Method manager (see section 4.5.1).
Print results (see section 4.7.6).
Open results window (see section 4.1.4).
Live parameters, which can be altered during a run
(see section 4.6.4).
Status overview of the connected instruments
(see section 4.3.2).
Unit information (see section 4.3.1).
Display GLP status (see section 4.8.3).
Select unit 1...4.
Start all channels of Block A (see section 4.6.4).
Start all channels of Block B (see section 4.6.4).
Call up help.
Close
The control window is closed by clicking on 763 PVC THERMOMAT CON-
TROL / File / Exit
or in the upper right part of the window.