Metrohm 763 PVC Thermomat Manual - Manual (Page 39)

4 Operation
763 PVC Thermomat
32
4.1.2 Glossary
Control window
The main window 763 PVC THERMOMAT CONTROL is known as the con-
trol window. It contains all the functions required for controlling the 763
PVC Thermomats connected to the PC.
Method
A method includes all parameters for carrying out and evaluating a de-
termination.
Determination
A determination is understood to be the automatic determination of the
induction time and/or stability time of a sample. In order to carry out a
determination a suitable method must be selected for the samples.
Results
The results of a determination are automatically stored in the Repos.mrd
database and can be observed in the results window.
Reevaluation
Reevaluation is the subsequent reprocessing of determinations, in par-
ticular the manual determination of the induction time with the aid of
tangents.
Recalculation
Recalculation means that results, equations and standards can be cal-
culated again at a later date.
Extrapolation
Extrapolation can be used to convert the results obtained at various
temperatures to a required target temperature. In addition, this method
can be used for converting the induction time to the standard time.