Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 121)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 105
Input 50 characters
Default value Sample size
Unit
on | off (Default value: on)
Enable/disable the display of the column Sample size unit in the sample
table. The option also exists of renaming the heading of this column in the
working sample table.
Input 50 characters
Default value Unit
3.3.2.3 Properties - Edit
Dialog window:Workplace ▶ Tools ▶ Sample
table ▶ New… ▶ [Sample table] ▶ Properties… ▶ Properties - Sample
table 'Name'
Dialog window:Workplace ▶ Run ▶ Determination series ▶ Prop-
erties Run window ▶ Properties - Determination series
Options for the editing of the sample table.
Apply data with
on | off (Default value: off)
Selection of the data field which must be filled in connection with automatic
data import via balance, barcode reader or file in order to apply the data for
the line in the sample data storage and to switch onward to the next line.
If the relevant column is empty, then additional imported data will be written
into the same line. This means that it is possible, for example, to fill a line
first with sample identifications per barcode reader and then later to apply
the sample size from a balance for the same line.
Selection ID1 | ID2 | ID3 | ID4 | ID5 | ID6 | ID7 | ID8 | ID9 |
ID10 | ID11 | ID12 | ID13 | ID14 | ID15 | ID16 |
Sample size | Sample size unit | Sample position
Default value Sample size
Lock editing in working sample table
on | off (Default value: off)
If this option is enabled, then it is not possible to edit lines in the sample
table that is loaded in the working sample table.