Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 425)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 409
5.6 Commands
5.6.1 Commands - General
5.6.1.1 Definition and Presentation
Subwindow: Method
Definition
A command is a part of a track with the following general properties:
￭ Command type
Each Command type defines the function of the command. The design-
qtion of the command type (short description in capital letters) cannot
be changed.
￭ Command name
Each command has a freely selectable command name which must be
unique within the method.
Note
In the event that a command has been renamed afterwards, the cross
references to this command (e.g. command variables) are adjusted auto-
matically within the method.
￭ Command parameters
The number and type of command parameters depend on the command
type and can be edited in the Command properties window.
￭ Commands in the run
Commands within the same track are carried out in sequence, one after
the other, in the method run.
Presentation
Commands are displayed double-spaced. The first row contains the name
of the command type (e.g. DET pH, CALC) and the second row contains a
freely selectable command name that is unique within the method. The
default command name is composed of the command type and a consec-
utive number.
The command types are structured by the following colors:
￭ Orange
Track commands