Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 146)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
130 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
2 columns
If this option is selected, then the sample identifications ID1…ID16 are
shown in double columns.
3.6.3.9.3 Properties - Edit
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Properties Run win-
dow ▶ Properties - Single determination
Definition of the sample data which is to be applied automatically for the
next single determination.
Copy automatically into the next determination
Sample size
on | off (Default value: on)
Sample size unit
on | off (Default value: on)
Sample position
on | off (Default value: on)
ID1...ID16
on | off (Default value: on)
3.6.3.9.4 Properties - Process
Tab: Workplace ▶ Run ▶ Single determination ▶ Properties Run window ▶ Prop-
erties - Single determination ▶ Process
Options for the processing of single determinations.
Method selection by assignment ID
on | off (Default value: off)
If this option is enabled, then the selected sample identification will be used
for the method selection. This identification receives the designation
Assignment ID, which can then no longer be changed; if this ID matches
one of the Assignment IDs from the sample assignment table (see Chapter
3.4.1, page 113), then the respective method from this table will be entered
in the field Method.
Selection ID1 | ID2 | ID3 | ID4 | ID5 | ID6 | ID7 | ID8 | ID9 |
ID10 | ID11 | ID12 | ID13 | ID14 | ID15 | ID16
Default value ID1