Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1435)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Devices
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1419
Date
Display of date and time the dark spectrum has been recorded.
User
Display of the user logged in during recording of the dark spectrum.
Method
Display of the method the dark spectrum has been recorded with.
Determination ID
ID of the determination the dark spectrum has been recorded in.
Integration time
Display of the integration time at recording the dark spectrum.
Averaged spectra
Number of spectra recorded and averaged.
Smoothing
Display of the number of neighbor pixels the light intensity of each pixel has
been averaged with.
Spectrum
Display of the dark spectrum. The graph can be zoomed with the mouse. By
double-clicking the whole spectrum is displayed again.
x axis
Display of the wavelength. Unit mm.
y axis
Display of the intensity. Unit Counts.
7.15.7 Properties - Reference spectrum
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Reference spectrum
On this tab information on the reference spectrum stored in the device is
displayed.
If no reference spectrum has been recorded yet or the calibration has been
reset to factory settings, -- is displayed in the fields.
Date
Display of date and time the reference spectrum has been recorded.