Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 983)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 967
Range 1 ... 10000
Default value 10
Smoothing
Number of neighboring pixels with which the light intensity is determined
for each measurement pixel.
Range 1 ... 100 Pixels
Default value 1 Pixels
Measurement
Measuring time
Duration of the absorption measurement.
Range 0 ... 999999 s
Default value 120 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Range 0.1 ... 999999.0 s
Default value 2.0 s
Stop measured value
Stops when the preset measured value has been reached since the start of
the measurement.
Range 0 ... 4000 mAU
Selection off
Default value off
5.6.4.13.4 MEAS Opt - Evaluations
Tab: Method ▶ MEAS Opt ▶ Properties... ▶ Evaluations
Command name
Name of the command.
Input 25 characters
The following additional methods for evaluation of measurement curves can
be activated and defined on this tab.