Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 166)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
150 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Range 1 ... 999
Default value 1
3.6.4.9.5 Importing sample data
Dialog window: Workplace ▶ Sample table / Determination series ▶ [Sample
table] ▶ Import data… ▶ Select files to import
Select a *.csv file in this dialog window with the sample data to be imported.
File name
Input or selection of the file that is to be imported.
Selection File name
File type
Selection of the import format for the import of data from a file (only
*.csv is possible).
Selection *.csv | *.csv (Unicode)
Default value *.csv
[Open]
The sample data from the selected file is inserted at the end of the sample
table.
Note
No matter the number of data fields defined on the Display tab, the
import file must always contain for each line the entirety of the sample
data in the format Method name;Sample posi-
tion;ID1;ID2;ID3;ID4;ID5;ID6;ID7;ID8;Sample size;Sample size
unit;ID9;ID10;ID11;ID12;ID13;ID14;ID15;ID16.
3.6.4.9.6 Exporting sample data
Dialog window:Workplace ▶ Tools ▶ Sample
table ▶ Open… ▶ [Open] ▶ [Sample table] ▶ Export data… ▶ Save
file under..
Dialog window:Workplace ▶ Run ▶ Determination series ▶ [Sample
table] ▶ Export data… ▶ Save file as..
In this dialog window, you determine the file into which the sample data is
to be exported.
File name
Input or selection of the file into which the export is to be made.
Selection File name