Chlorine, free - udv – LaMotte SMART3 Colorimeter User Manual

Page 121

Advertising
background image

CHLORINE, FREE - UDV

DPD METHOD–UNIT DOSE VIALS · CODE 4311-J

QUANTITY

CONTENTS

CODE

1

*Free Chlorine Unit Dose Vials, 20 pouches

*4311-J

*WARNING: Reagents marked with an * are considered to be potential health

hazards. To view or print a Material Safety Data Sheet (MSDS) for these reagents

go to www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail,

phone or fax.

Equipment needed but not supplied:

STANDARD ACCESSORY PACKAGE · CODE 1961
1

Package of 3 Vials (empty)

0156

1

Syringe, 3 mL, plastic

1184

1

Foil Storage Bag

9467

Or:

ADVANCED ACCESSORY PACKAGE · CODE 1962
1

Pipettor, 3mL

30528

1

Pipet Tip (0-5 mL)

30695

1

Cuvette Rack

31695

1

Package of 3 Vials (empty)

0156

1

Foil Storage Bag

9467

All water for cities and communities must be sanitized; even waters that come from

clean sources, protected watersheds, reservoirs, and deep wells, are commonly

sanitized to assure safety. Chlorine is the most commonly used sanitizer for several

reasons: it is effective against a wide range of microorganisms, the cost is low, and

the methods of applying it have been well developed. If an adequate concentration

of chlorine is present in the water for a few minutes, disease producing bacteria

will be destroyed. A number of conditions affect the sanitizing action of chlorine.

In municipal systems these can be controlled so that if chlorine is detectable, it

can be assumed that bacteria have been killed. The factors that infl uence the rate

of sanitization are temperature, pH, presence of other materials that react with

chlorine, time, and the concentrations of the various chlorine combinations that are

formed in the water with ammonia and other substances that react with chlorine.

The fact that chlorine can be easily detected and measured makes chlorine a

favorite water sanitizer of those concerned with the public safety of water supplies.

Chlorine concentrations in the range of 0.1 to 0.4 parts per million are usually

maintained in municipal supplies.

SMART3 Test Procedures 11.10

CHLORINE, Free, UDV

Test P

rocedures

Advertising