LaMotte SMART3 Colorimeter - Manual (Page 46)

 NAMING THE TEST
A User Test can be up to 16 characters long. The menu choices for each
character are 26 upper case letters A to Z, 26 lower case letters a to z, ten
numerals 0 to 9, a space, a dash (-) and a decimal point (.). The existing name is
displayed on the bottom line of the display. The character which is to be edited
will blink and that character is also displayed in the center of the display. The
character can be changed by using or to scroll to other characters.
Use
ENTER
to select a character. The edited name is saved at any time by
pressing
EXIT
or by pressing
ENTER
after selecting the sixteenth character.
1. From the User Test menu,
press to scroll to Name
the Test.
111 USER TEST 07
Name the Test
Select Vial/WL
STD Calibration
Enter Constants
12:00:00 001/500
2. Press
ENTER
to select Name
the Test. A reverse font
(dark background with a
light character) will appear
to indicate the character that
will be adjusted. The same
character will also appear in
the center of the display.
Name the Test
R S T
U
V W X
111 U SER TEST 07
12:00:00 001/500
3. Press or to scroll
to the desired character. In
this example, the test name
will be H2O.
Name the Test
E F G
H
I J K
111 U SER TEST 07
12:00:00 001/500
44 SMART3 Colorimeter 11.10
Editing/Set Up