Turbidity – LaMotte SMART3 Colorimeter User Manual
Page 287
Advertising
TURBIDITY
ABSORPTION METHOD • NO REAGENTS REQUIRED
Turbidity is a measure of water clarity and is independent of color. Turbidity
is caused by undissolved and suspended solids. Mud, silt, algae, and
microorganisms can all cause turbidity. Turbidity is a gross measurement of water
quality.
APPLICATION:
Surface and industrial water for non-compliance
monitoring. (For compliance monitoring at low turbidity
levels, use a commercial nephelometer.)
RANGE:
0–500 FAU (Formazin Attenuation Units)
MDL:
3 FAU
METHOD:
Absorptimetric, 180° detector
SAMPLE HANDLING
& PRESERVATION:
Measure sample as soon as possible after collection.
INTERFERENCES:
Check for stray light interference (see page 69).
SMART3 Test Procedures 11.10
TURBIDITY
Test P
rocedures
Advertising