NISSAN 2011 Quest - Owner's Manual - Manual (Page 134)

Black plate (128,1)
Model "E52-D" EDITED: 2010/ 10/ 25
Push the
*
B side of the switch. The moonroof
will automatically tilt up all the way.
To tilt down, push the
*
A side of the switch.
The roof will stop when the switch is released.
SIC4644
REAR MOONROOF
Rear moonroof operation switches are located
on the front map light and rear ceiling.
Sunshade
The sunshade will open automatically when the
rear moonroof is opened. However, it must be
closed manually.
Sliding
To fully open or close the moonroof, push the
switch to the open
*
A or close
*
B position
and release. It does not need to be held. The
roof will automatically open or close all the way.
To stop the roof, push the switch once more
while it is opening or closing.
Tilting
To tilt up, first close the moonroof, then push the
switch to the tilt up position
*
B and release it; it
does not need to be held. To tilt down the
moonroof, push the switch to the tilt down
position
*
A .
Locking
When the window lock button is pushed in, the
rear moonroof cannot be operated. When the
window lock position is pushed off, the rear
moonroof can be operated. (See “POWER
WINDOWS” earlier in this section.)
Auto-reverse function
WARNING
There are some small distances imme-
diately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., in-
side the vehicle before closing the
moonroof.
If the control unit detects something caught in
the moonroof when it is closing, the moonroof
will be immediately opened.
The auto reverse function can be activated when
the moonroof is closed by automatic operation
when the ignition switch is in the ON position or
2-52 Instruments and controls