NISSAN 2011 Quest - Owner's Manual - Manual (Page 221)

Black plate (215,1)
Model "E52-D" EDITED: 2010/ 10/ 25
display:
— Pushing the “AUTO” button changes
both the driver’s and front passenger’s
side temperature.
— Pushing the “DUAL” button allows the
user to independently change the front
passenger’s side temperature with the
passenger side temperature control
buttons (“
” and “ ”). (“DUAL”
will appear on the display.)
To cancel the separate temperature
setting, push the “DUAL” button
(“DUAL” will disappear from the display)
and the driver’s side temperature setting
will be applied to both the driver’s and
front passenger’s sides.
4. Models with Advanced Climate Control
System (ACCS):
Push the “ AUTO” auto-recircula-
tion button. The indicator light on the
“
AUTO” auto-recirculation button
will illuminate. In this mode, the sensor
detects odors and gas to automatically
switch between the air recirculation
mode and the outside air circulation
mode. (See “Advanced climate control
system” later in this section for details.)
Models without Advanced Climate Control
System (ACCS):
Push and hold the air recirculation
“
” button or outside air circulation
“ ” button (the one with the indicator
light on) for more than 2 seconds to set
the automatic control between the air
recirculation and outside air circulation
modes. (The “
” and “ ” indicator
lights will blink twice.)
The following conditions need to be met for the
automatic air intake control mode to function
properly.
. The air flow control is not in the front
defogger mode (the indicator light on the
front defroster “
FRONT” button is
turned off).
. The outside temperature is approximately
32 8F (08C) or above.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C off):
1. Push the “AUTO” button.
(The AUTO indicator light will illuminate.)
2. If the A/C indicator light illuminates, push the
“A/C” button.
(The A/C indicator light will turn off.)
3. Push the temperature control buttons
(“ ” and “ ”) (driver’s side) to set
the desired temperature.
When the DUAL mode is turned off (“DUAL”
does not appear on the display):
— Pushing the “AUTO” button changes
both the driver’s and front passenger’s
side temperature.
— Pushing the “DUAL” button allows the
user to independently change the front
passenger’s side temperature with the
passenger side temperature control
buttons (“
” or “ ”). (“DUAL” will
appear on the display.)
To cancel the separate temperature
setting, push the “DUAL” button
(“DUAL” will disappear from the display)
and the driver’s side temperature setting
will be applied to both the driver’s and
front passenger’s sides.
4. Models with Advanced Climate Control
System (ACCS):
Push the “ AUTO” auto-recircula-
tion button. The indicator light on the
“
AUTO” auto-recirculation button
will illuminate. In this mode, the sensor
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-37