Hood -24, Warning – NISSAN 2011 Quest - Owner's Manual User Manual
Page 168
Black plate (162,1)
Model "E52-D" EDITED: 2010/ 10/ 25
SPA2858
When opening the hood:
1. Pull the hood lock release handle
*
1
located below the instrument panel; the
hood will then spring up slightly.
2. Locate the lever
*
2
in between the hood
and grille and push the lever sideways with
your fingertips.
3. Raise the hood
*
3
.
4. Remove the support rod
*
4
and insert it
into the slot
*
5
.
Hold the coated part
*
A
when removing or
resetting the support rod. Avoid direct
contact with the metal parts, as they may
be hot immediately after the engine has
been stopped.
When closing the hood:
1. Reset the support rod to its original position.
2. Slowly move the hood down to latch the
lock. Push the hood down to lock the hood
securely into place.
WARNING
. Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the
hood to fly open and result in an
accident.
. If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.
HOOD
3-24
Pre-driving checks and adjustments