NISSAN 2011 Quest - Owner's Manual User Manual

Page 385

Advertising
background image

Black plate (379,1)

Model "E52-D" EDITED: 2010/ 10/ 25

SCE0585

Jack-up point

1. Place the jack directly under the jack-up

point as illustrated so the top of the jack
contacts the vehicle at the jack-up point.
Align the jack head between the two
notches in the front or the rear as shown.
Also fit the groove of the jack head between
the notches as shown.

The jack should be used on level firm
ground.

SCE0504

2. Loosen each wheel nut one or two turns by

turning counterclockwise with the wheel nut
wrench. Do not remove the wheel nuts
until the tire is off the ground.

3. To lift the vehicle, securely hold the jack lever

and rod with both hands as shown above.
Carefully raise the vehicle until the tire clears
the ground. Remove the wheel nuts, and
then remove the tire.

In case of emergency

6-7

Advertising