Armrests -13 – NISSAN 2011 Quest - Owner's Manual User Manual
Page 33
Black plate (27,1)
Model "E52-D" EDITED: 2010/ 10/ 25
SSS1126
Install
1. Align the headrest stalks with the holes in
the seat. Make sure that the headrest is
facing the correct direction. The stalk with
the adjustment notch must be installed in the
hole with the lock knob
*
1
.
2. Push and hold the lock knob and push the
headrest down.
3. Properly adjust the headrest before an
occupant uses the seating position.
SPA1456
Front and 2nd row seats
ARMRESTS
Front and 2nd row seats
To use the armrests on any seat, pull them down
to the resting position.
SSS1162
The armrest angle can be adjusted freely.
*
1
Pull the armrest between
*
A
and
*
B
.
*
2
Pull it down to
*
C
.
*
3
Pull up the armrest slowly, it can be secured
between
*
B
and
*
C
.
Safety — Seats, seat belts and supplemental restraint system
1-13