NISSAN 2011 Quest - Owner's Manual - Manual (Page 220)

Black plate (214,1)
Model "E52-D" EDITED: 2010/ 10/ 25
SAA3595
1. Temperature control buttons (driver side)
2. “ ” air recirculation button
3. “ AUTO” auto-recirculation button (models
with Advanced Climate Control System)/
“
” Outside air circulation button (models
without Advanced Climate Control System)
4. “ FRONT” front defroster button
5. Display
6. “ REAR” rear window defroster button (See
“REAR WINDOW AND OUTSIDE MIRROR
DEFROSTER SWITCH” in the “2. Instruments
and controls” section.)
7. Temperature control buttons (passenger side)
8. “MODE” manual air flow control button
9. “ON·OFF” button for air conditioning system
10. “AUTO” button
11. “
” fan speed control buttons
12. “A/C” air conditioner ON/OFF button
13. “REAR” control button
14. “DUAL” zone control ON/OFF button
AUTOMATIC AIR CONDITIONER
Automatic operation (AUTO)
The AUTO mode may be used year-round as the
system automatically controls constant tempera-
ture, air flow distribution and fan speed after the
desired temperature is set manually.
To turn the heater and air conditioner on or off,
push the “ON·OFF” button.
Cooling and dehumidified heating:
1. Push the “AUTO” button.
(The AUTO indicator light will illuminate.)
2. If the A/C indicator light does not illuminate,
push the “A/C” button.
(The A/C indicator light will illuminate.)
3. Push the temperature control buttons
(“ ” and “ ”) (driver’s side) to set
the desired temperature.
. The temperature can be set within the
range of 60 to 90 8F (18 to 328C).
. When “DUAL” does not appear on the
4-36 Monitor, heater, air conditioner, audio, phone and voice recognition systems