Tire labeling -32 – NISSAN 2011 Quest - Owner's Manual User Manual
Page 434
Black plate (430,1)
Model "E52-D" EDITED: 2010/ 10/ 25
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
P225/65R/
16 99T
240 kPa,
35 PSI
P235/55R/
18 99T
240 kPa,
35 PSI
REAR
ORIGINAL
TIRE
P225/65R/
16 99T
240 kPa,
35 PSI
P235/55R/
18 99T
240 kPa,
35 PSI
SPARE
TIRE
T135/80D/
16 101M
420 kPa,
60 PSI
T135/90D/
16 102M
420 kPa,
60 PSI
SDI1575
Example
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the side-
wall of all tires. This information identifies
and describes the fundamental character-
istics of the tire and also provides the tire
identification number (TIN) for safety stan-
dard certification. The TIN can be used to
identify the tire in case of a recall.
SDI1606
Example
*
1
Tire size (example: P215/60R16
94H)
1.
P: The “P” indicates the tire is designed
for passenger vehicles. (Not all tires
have this information.)
2.
Three-digit number (215): This number
gives the width in millimeters of the tire
from sidewall edge to sidewall edge.
3.
Two-digit number (60): This number,
known as the aspect ratio, gives the
tire’s ratio of height to width.
4.
R: The “R” stands for radial.
8-32
Maintenance and do-it-yourself