NISSAN 2011 Quest - Owner's Manual - Manual (Page 267)

Black plate (261,1)
Model "E52-D" EDITED: 2010/ 10/ 25
following items.
. Shuffle
Choose “Shuffle OFF”, “Shuffle All Tracks”
and “Shuffle Group”.
. Repeat
Choose from “Repeat OFF”, “Repeat 1
Track”, “Repeat All Tracks” and “Repeat
Group”.
SAA2511
Bluetooth ® settings
To set up the Bluetooth ® device system to the
preferred settings, push the SETTING button
and select the “Bluetooth” key.
Bluetooth:
If this setting is turned off, the connection
between the Bluetooth
® devices and the in-
vehicle Bluetooth ® module will be canceled.
Connect Bluetooth:
Connects to the Bluetooth ® device. See “Con-
necting procedure” earlier in this section. Up to
5 devices can be registered.
Connected Devices:
Registered devices are shown on the list. Select
a Bluetooth
® device from the list, the following
options will be available.
. Select
Select “Select” to connect the selected
device to the vehicle. If there is a different
device currently connected, the selected
device will replace the current device.
. Edit
Rename the selected Bluetooth ® device
using the keypad displayed on the screen.
(See “HOW TO USE TOUCH SCREEN
(models with navigation system)” earlier in
this section.)
. Delete
Delete the selected Bluetooth ® device.
Edit Bluetooth Info:
Change the name broadcasted by this system
over Bluetooth
® . Change the PIN code that is
entered when connecting a hands free device to
this system.
Replace Connected Phone:
Replace the Bluetooth ® connection with a
connected Bluetooth ® cellular phone. For details
about Hands-Free Phone System, see “BLUE-
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-83