NISSAN 2011 Quest - Owner's Manual - Manual (Page 24)

Black plate (18,1)
Model "E52-D" EDITED: 2010/ 10/ 25
Front power seat adjustment
Operating tips:
. The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds,
then reactivate the switch.
. Do not operate the power seat switch for a
long period of time when the engine is off.
This will discharge the battery.
See “AUTOMATIC DRIVE POSITIONER” in the
“3. Pre-driving checks and adjustments” section
for the seat position memory function (if so
equipped).
CAUTION
When adjusting the seat positions, be
sure not to contact any moving parts to
avoid possible injuries and/or da-
mages.
SSS1051
Forward and backward:
Moving the switch
*
1 forward or backward will
slide the seat forward or backward to the
desired position.
Reclining:
Move the recline switch
*
2 backward until the
desired angle is obtained. To bring the seatback
forward again, move the switch
*
2 forward.
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
USAGE” later in this section.) Also, the seatback
can be reclined to allow occupants to rest when
the vehicle is stopped and the transmission is in
the P (Park) position.
1-4 Safety — Seats, seat belts and supplemental restraint system