NISSAN 2011 Quest - Owner's Manual User Manual
Page 340
Black plate (334,1)
Model "E52-D" EDITED: 2010/ 10/ 25
SAA2552
8. The system requests that you repeat a
command after a tone.
9. After the tone sounds and the icon on the
screen changes from
to
, speak
the command that the system requested.
10. When the system has recognized the voice
command, the voice of the user is learned.
Push the
switch or BACK button to return
to the previous screen.
If the system has learned the command cor-
rectly, the voice command status on the right
side of the command turns from “None” to
“Stored”.
SAA2553
Speaker Adaptation function settings:
Edit User Name
Edit the user name using the keypad displayed
on the screen.
Delete Voice Data
Resets the user’s voice that the voice recogni-
tion system has learned.
Continuous Learning
When this item is turned on, you can have the
system learn the voice commands in succes-
sion, without selecting commands one by one.
Minimize voice feedback (for Alternate
Command Mode)
To minimize the voice feedback from the system,
perform the following steps.
1. Push the SETTING button on the instrument
panel.
2. Select the “Others” key.
3. Select the “Voice Recognition” key.
4. Select the “Minimize Voice Feedback” key.
5. The setting is turned on and the voice
guidance will now be reduced when using
the Voice Recognition system.
4-156
Monitor, heater, air conditioner, audio, phone and voice recognition systems