NISSAN 2011 Quest - Owner's Manual - Manual (Page 211)

Black plate (205,1)
Model "E52-D" EDITED: 2010/ 10/ 25
SAA2021
Backing up near a projecting object
The predicted course lines
*
A do not touch the
object in the display. However, the vehicle may
hit the object if it projects over the actual
backing up course.
SAA2022
Backing up behind a projecting object
The position
*
C is shown further than the
position
*
B in the display. However, the
position
*
C is actually at the same distance
as the position
*
A . The vehicle may hit the
object when backing up to the position
*
A if
the object projects over the actual backing up
course.
HOW TO ADJUST THE SCREEN
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the RearView
Monitor, push the SETTING button with the
RearView Monitor on, select the item key and
adjust the level using the multi-function con-
troller.
Do not adjust the Brightness, Tint, Color,
Contrast and Black Level of the RearView
Monitor while the vehicle is moving. Make sure
the parking brake is firmly applied and the
engine is not running.
The display of the predicted course lines can be
set to ON or OFF. For details, see “CAMERA
settings” earlier in this section.
OPERATING TIPS
. When the selector lever is shifted to the R
(Reverse) position, the monitor screen auto-
matically changes to the RearView Monitor
mode. However, the radio can be heard.
. It may take some time until the RearView
Monitor or the normal screen is displayed
after the selector lever has been shifted to R
from another position or to another position
from R. Objects may be distorted momenta-
rily until the RearView Monitor screen is
displayed completely.
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-27